Product recommendations
Product Description
Our AZ-Delivery relay modules switch quickly and reliably many switching operations. Thanks to an additional transistor, the module can be switched with most microcontrollers with little current. The relays used are generously dimensioned to allow permanent operation even under unfavorable operating conditions.
The optocouplers and diodes protect your controller from damage. The source of the power supply can be configured with a jumper located on the board.
The relays are commonly used in remote control, communications, mechatronics, power electronics, etc. They can also be used to isolate high power voltage/current electronics (such as AC or DC motors, AC devices, etc.) from microelectronics (microcontrollers, sensors, etc.).

Particularities
- Generously dimensioned to allow permanent operation even under unfavorable operating conditions.
- Thanks to an additional transistor, the module can be switched with most microcontrollers with low current.
- Compact design and large capacity: this 8-relay module can switch high currents up to 5A.
Technical specifications
Type | 8-channel |
Dimensions | 50 x 140mm [1.97 x 5.5in] |
Maximum DC | 5a 30V |
Maximum ac | 5a 50V |
TTL tax signal | 5V DC |
Contact type | Both: Usually closed - NC, usually open - NO |

Powerful elements
Supported by using a DC5V relay and an SMD optocoupler from the low-level trigger, the module can also be used for demanding projects.

Quick start guide
When you purchase one of our high-quality products, you will also receive an included e-book for a quick introduction to the world of microelectronics.
Wichtige Downloads & Links
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Our bestsellers


Featured project proposal
Relais fernschalten mit nRF24L01
Nachdem Andreas Wolter meinen „Santa Detector“ um zwei nRF24L01 Transceiver ergänzt hatte, um die Sensorsignale in einem anderen Zimmer zu empfangen, lagen die beiden Module bei mir auf dem Tisch, bereit für ein neues Projekt. Wollte ich nicht schon seit längerem verschiedene Lichtkreise auf meiner Modelleisenbahnanlage mit Relais schalten? Der Micro Controller mit dem Funkempfänger und den Relais irgendwo versteckt unter der Platte, der Sender griffbereit neben den Fahrpulten.
Weitere Projektvorschläge
Der Pool-Controller (2/4)
Im vorangegangenen Artikel haben wir einen Überblick über das Projekt des smart gesteuerten Pools gegeben. In diesem zweiten Teil werden wir auf das Herzstück, den Controller, e...
PlatformIO: Erste Schritte
Als erstes möchte ich mich bei allen unseren Lesern für das rege Feedback zu unserem Artikel „PlatformIO Installation“ bedanken. Viele haben den Artikel gelesen, und auch die So...
More recommended products

